Safety Harness, Lifting Gear, Crane Lifting Equipment, Fall Arrest Harness Equipment, Cranes Hoist and more..
We manufacture and stock a wide variety of lifting equipment, ranging from chain slings, webbing slings, and wire rope slings, to safety harness, lifting gear, crane lifting equipment, fall arrest harness equipment, cranes hoist, all for sale and for hire. A
small selection is shown below. This represents only a fraction of our stock, so if you can't see what you need please
contact us or
download a brochure. We also stock Genie lifts as well a vast array of eye bolts, shackles
and other small fixings.
Please contact us
with your requirements, and we will be glad to help. Further information and price lists are
available in our downloadable brochures.
Chain Slings
We can assemble Grade 80/100 chain slings to your own specification. Whether you need a
single or multi-leg configuration, we can provide a suitable sling complete with a choice of end fittings: hooks,
links, shackles etc.
Chain Diam. / mm
Working Load Limit / tonnes
Configuration:
Straight Lift
2 Leg Sling
3 Leg Sling
4 Leg Sling
Angle to vertical:
0°
a = 0° to 45°
a = 45° to 60°
a = 0° to 45°
a = 45° to 60°
a = 0° to 45°
a = 45° to 60°
Factor:
1.0
1.4
1.0
2.1
1.5
2.1
1.5
7
1.50
2.12
1.50
3.15
2.24
3.15
2.24
8
2.00
2.80
2.00
4.25
3.00
4.25
3.00
10
3.15
4.25
3.15
6.70
4.75
6.70
4.75
13
5.30
7.50
5.30
11.20
8.00
11.20
8.00
16
8.00
11.20
8.00
17.00
11.80
17.00
11.80
20
12.50
17.50
12.50
26.50
19.00
26.50
19.00
22
15.00
21.20
15.00
31.50
22.40
31.50
22.40
26
21.20
30.00
21.20
45.00
31.50
45.00
31.50
32
31.50
45.00
31.50
67.00
47.50
67.00
47.50
Webbing Slings
We stock a full range of webbing slings suitable for a variety of lifting applications.
Use the colour coded table below to match the round sling's or web sling's working load limit (WLL) to your
requirements and intended lifting configuration.
Colour Code
Working Load Limit / kg
Configuration:
Straight Lift
Choke Lift
Basket Lift
2 Leg Sling
4 Leg Sling
Angle to vertical:
0°
N/A
0° to 7°
7° to 45°
45° to 60°
a = 0° to 45°
a = 0° to 45°
Mode Factor:
1.0
0.8
2.0
1.4
1.0
1.4
2.0
Violet
1000
800
2000
1400
1000
1400
2000
Green
2000
1600
4000
2800
2000
2800
4000
Yellow
3000
2400
6000
4200
3000
4200
6000
Grey
4000
3200
8000
5600
4000
5600
8000
Red
5000
4000
10000
7000
5000
7000
10000
Brown
6000
4800
12000
8400
6000
8400
12000
Blue
8000
6400
16000
11200
8000
11200
16000
Orange
10000
8000
20000
14000
10000
14000
20000
Orange
12000
9600
24000
16800
12000
16800
24000
Wire Rope Slings
Our wire rope slings are manufactured in house to your own specification. A variety of
terminations can be fitted, including: soft eyes, thimbles, shackles, hooks etc. Please use the following table to
select the combination of rope thickness and sling configuration that suits your lifting requirements.
Nominal Rope Diam. / mm
Working Load Limit / tonnes
Configuration:
Straight Lift
2 Leg Sling
3 and 4 Leg Slings
Choke Hitch
Angle to vertical:
0°
a = 0° to 45°
a = 45° to 60°
a = 0° to 45°
a = 45° to 60°
0°
Factor:
1.0
1.4
1.0
2.1
1.5
1.6
8
0.70
0.95
0.70
1.50
1.05
1.10
9
0.85
1.20
0.85
1.80
1.30
1.40
10
1.05
1.50
1.05
2.25
1.60
1.70
11
1.30
1.80
1.30
2.70
1.95
2.12
12
1.55
2.12
1.55
3.30
2.30
2.50
13
1.80
2.50
1.80
3.85
2.70
2.90
14
2.12
3.00
2.12
4.35
3.15
3.30
16
2.70
3.85
2.70
5.65
4.20
4.35
18
3.40
4.80
3.40
7.20
5.20
5.65
20
4.35
6.00
4.35
9.00
6.50
6.90
22
5.20
7.20
5.20
11.00
7.80
8.40
24
6.30
8.80
6.30
13.50
9.40
10.00
26
7.20
10.00
7.20
15.00
11.00
11.80
Hand Chain Blocks
The robust, all-steel construction has roller or ball bearings fitted to all rotating
components. This reduces friction and increases efficiency. The hoist is epoxy resin coated as standard.
The hand chain cover with special slots and the the optimal design of the hand
chain wheel prevent the hand chain from blocking and derailing.
Hardened load chain sheave with four precision machined pockets.
Two guide rollers and one chain stripper ensure accurate alignment of the load
chain over the load sheave.
All brake components are manufactured from high quality materials and are zinc
plated and chromalized for added corrosion protection.
Optional
All models from 1000kg can be optionally equipped with an overload prevention device in
the form of a slip clutch which is factory preset to approx. 25% ± 15% overload. This device can be fitted at
a later date without problems.
Chain container for hoists up to 5t available.
Zinc plated design for applications which demand higher standards of protection against
corrosion: e.g. food processing; farming, or sewage treatment.
Rust and acid resistant load and hand chains.
Pneumatic Chain Hoists
With 100% duty rating and an unlimited number of starts, the model CPA (shown below) is
suitable for heavy duty applications. It is insusceptible to contamination, humidity and aggressive mediums from
the outside. The hoists are composed of three main components which makes service easy and inexpensive.
Robust rotating piston motor has an adjustable spring pressure brake that hold the
load secure even in the event of an air failure.
High starting torque due to switching valves in the motor body.
Sensitive control by means of 2 resp. 4 button pendant control with emergency
stop.
Low noise emission due to large dimension silencer.
Designed for operating pressures of 4 to 6 bar.
The standard oil bath lubricated planetary gearbox is particularly smooth running
and enables a low overall height.
The 5-pocket load chain sheave, manufactured from wear-resistant case hardening
steel, is matched perfectly to the load chain to guarantee smooth and precise chain motion.
The replaceable chain guide is robust and precision machined.
Pneumatic trolleys for top hook or rigid attachment on request.
Pull cord control optionally available.
Electric Chain Hoists
Available with suspension hook or integral trolley, the model CPM (shown below) is a robust,
reliable and easy to service unit with a long service life. The whole range is fitted with many standard features
that were previously only available as extras. The integral limit switches for the highest and lowest hook
positions considerably extend the working life span of the slip clutch, motor and gearbox.
Classification 1 Am. As required the model CPM (with appropriate changes to
lifting capacity resp. duty cycle) can also be graded up to the classification 3m. All known domestic
and European regulations of the classification according to FEM, ISO or BS are complied with resp.
exceeded.
Counters for operating hours and number of starts for advanced operation
monitoring.
Main contractor as standard for increased safety.
2 year warranty (excluding wear parts).
Thermal overload protection as standard for the whole range.
Duty cycle 50% ED for single speed.
Electromagnetic, spring pressure brake holds the load safely even in the event of
power failure.
Chain container standard.
Motors according to VDE 0530 protected to IP55, against ingression of dust
and water.
Standard operating voltage: Euro-voltage 400V, 50Hz, 3-phase.
Increased operating safety through 48V control voltage (contractor control) and an
encapsulated pendant control to IP65.
Hydraulic Jacks
For all universal operations where high forces and compact dimensions are required. Robust
cylinder design, manufactured from chromium-molybdenum steel with hard chromium-plated piston and large bronze
bearings.
5 to 100 tonnes; maximum operating pressure 700 bar
Includes saddle, mounting threads and female coupler half.
Manual Trolleys
The manual trolleys illustrated below are available in two types: The Push type (model HTP)
and Geared type (model HTG) with capacities of 500 - 5000 kg and 500 - 20,000 kg respectively. Both models enable
the exact positioning or easy traversing of large loads with either manual or powered hoisting equipment.
Excellent rolling features due to machined steel wheels mounted on prelubricated
encapsulated ball bearings.
Adjustable to fit a wide range of beam widths and profiles (e.g. INP, IPE and IPB).
The trolley wheels are designed for a max. beam profile incline of 14%.
Adjustments are made by rotating the clevis load bar which also ensures the
centred positioning of the hoist in the clevis - no creeping to the left or the right.
Anti-tilt and wheel fracture support devices according to DIN 15018 and the
machinery directives are standard.
Optional
Buffers can be fitted.
Locking device to secure the trolley in position on the beam (park position, e.g.
on ships).
Light weight, compact, high strength aluminium housing. Smooth contour design with
large flat bottom surface for increased stability in horizontal and vertical working position.
Forward and reversing levers in tandem provide slim design and assure power
transfer along the centre line.
Overload protection is by a shearing pin in the forward lever. Spare shear pins
are conveniently located in the carrying handle or operating lever. A broken pin can be replaced
without removing the load.
A lever disengages the rope clamp system, allowing easy, smooth installation of
the wore rope.
The Yaletrac model uses a special flexible wire rope. It has six strands with a
steel core amd is identified by an orange strand. The rope is tapered at one end for easy threading and
fitted with a safety hook on the other end.
The parallel arrangement of the clamping system protects the wire rope by
distributing the clamping forces evenly. A long rope advance for each lever stroke increases the
working speed.
The large opening in the top of the unit allows easy cleaning: simply flush the
unit with water, apply motor oil for lubrication and the Yaletrac is again ready for use.
Safety Harnesses
We stock a wide range of safety harnesses. Our lowest priced, general purpose P-10 model, is
shown below. Other models have additional features and/or are suitable for more specialised applications.
